← StenSeal
StenSeal® · Airport joints
Which StenSeal?
There is no airport in Turkey without our sealants. Mark what you need.
Recommendation
StenSeal® SI 110
Unless you have a specific requirement, we recommend this to everyone. Best in class — elasticity, durability, adhesion, jet-blast resistance and ease of application.
See SI 110 →0
No product meets this combination.
StenSeal SI 110Single-Component, Self-Leveling Silicone Joint SealantIndoor use requires good ventilation for a few days.Tensile modulus is lower than 0.15 MPa for ASTM D5893 compliance.StenSeal SI 111Single-Component, Non-Sagging Silicone Joint SealantIndoor use requires good ventilation for a few days.Tensile modulus is lower than 0.15 MPa for ASTM D5893 compliance.StenSeal PU JFRSingle-Component, Jet-Fuel-Resistant, Polyurethane Joint SealantIndoor use requires good ventilation for a few days.StenSeal PU JFR-LVSingle-Component, Jet-Fuel-Resistant, Cold-Applied, Self-Leveling Polyurethane-Based Joint SealantIndoor use requires good ventilation for a few days.StenSeal PU JFR-NSSingle-Component, Jet-Fuel-Resistant, Cold-Applied, Non-Sag Polyurethane-Based Joint SealantIndoor use requires good ventilation for a few days.StenSeal 2PS 110Water and Chemical Resistant, Self-Leveling Polysulfide Joint SealantStenSeal 2PS 111Water and Chemical Resistant, Non-Sagging Polysulfide Joint SealantStenSeal 2PT 210Two-Component, Cold-Applied, Self-Leveling, Coal-Tar-Modified, Elastomeric, Polyurethane-Based Joint SealantStenSeal 2KTwo-Component, Cold-Applied, Self-Leveling, Coal-Tar-Modified, Elastomeric, Polyurethane-Based Joint SealantStenSeal 2PU 210Self-Leveling Polyurethane Joint SealantStenSeal 2PU 211Non-Sagging Polyurethane Joint SealantStenSeal 2PU 310Cold-Applied, Polyurethane-Based, Self-Leveling Joint Sealant for Heavy-Duty and Traffic PurposesStenSeal 2PU 311Cold-Applied, Polyurethane-Based, Non-Sag Joint Sealant for Heavy-Duty and Traffic PurposesStenSeal PU 102Single-Component, Polyurethane Joint SealantStenSeal PU 202Single-Component, Polyurethane Joint SealantStenSeal PU 300Single-Component, Polyurethane Joint Sealant
What does what
Each row is a declared capability. A yes/no, not a measured value.
| SI 110 | SI 111 | PU JFR | PU JFR-LV | PU JFR-NS | 2PS 110 | 2PS 111 | 2PT 210 | 2K | 2PU 210 | 2PU 211 | 2PU 310 | 2PU 311 | PU 102 | PU 202 | PU 300 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Also suitable indoors | ●1 | ●1 | ●1 | ●1 | ●1 | ● | ● | ○ | ○ | ● | ● | ● | ● | ● | ● | ● |
| General hydrocarbon resistance | ○ | ○ | ○ | ○ | ○ | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Jet-fuel immersion resistance | ○ | ○ | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| EN 14188-2 compliance | ★2 | ★2 | ● | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| EN 15651-4 compliance | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ● | ● | ● |
| ASTM D5893 compliance | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| ASTM C920 compliance | ● | ● | ● | ● | ● | ● | ● | ● | ○ | ● | ● | ○ | ○ | ● | ○ | ○ |
| No-mix application (single-component) | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ● | ● | ● |
| Primerless application | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Class-leading elasticity | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Jet-blast resistance | ● | ● | ● | ● | ● | ● | ● | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| VTOL jet-blast resistance | ● | ● | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
| Adjustable cure speed | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ● | ○ | ● | ● | ● | ● | ○ | ○ | ○ |
1. Indoor use requires good ventilation for a few days.
2. Tensile modulus is lower than 0.15 MPa for ASTM D5893 compliance.